Clamping force | U.S.Ton | 146 |
Distance between tie-bars |
In | 20.08 x 20.08 |
Overall size of platens (H x V) |
In | 28.35 x 28.35 |
Open daylight (max.) |
In | 33.46 |
Mold space (min.-max.) |
In | 7.09 x 17.72 |
Opening stroke (max.) |
In | 15.75 |
Mold open/close speed (max.) |
In/Sec | 47.24 |
Locating ring diameter |
In | 4.0 |
Ejector pattern | Center, 7.0 in (5 points) | |
Ejector stroke | In | 3.94 |
Ejector force | U.S.Ton | 3.60 |
Plasticizing unit | C160S | C250M | C360M | C450M | |||||||||
Screw diameter | mm | 25 | 28 | 32 | 28 | 32 | 36 | 32 | 36 | 40 | 36 | 40 | 45 |
Injection pressure |
p.s.i. | 39,740 | 31,618 | 24,221 | 41,191 | 31,473 | 24,801 | 39,595 | 31,183 | 25,382 | 37,565 | 30,313 | 23,931 |
Holding pressure | p.s.i. | 39,740 | 31,618 | 24,221 | 41,191 | 31,473 | 24,801 | 39,595 | 31,183 | 25,382 | 37,565 | 30,313 | 23,931 |
Injection capacity |
in3 | 3.1 | 3.9 | 5.1 | 5.2 | 6.9 | 8.7 | 7.9 | 9.9 | 12.3 | 9.9 | 12.3 | 15.5 |
Injection weight | g | 49 | 61 | 80 | 83 | 108 | 137 | 124 | 156 | 193 | 156 | 193 | 244 |
oz | 1.7 | 2.2 | 2.8 | 2.9 | 3.8 | 4.8 | 4.4 | 5.5 | 6.8 | 5.5 | 6.8 | 8.6 | |
Plasticizing capacity (max.) |
lb/hr | 57 | 82 | 117 | 82 | 117 | 168 | 117 | 168 | 223 | 168 | 223 | 300 |
Injection rate | in3/sec | 12.0 | 15.0 | 19.6 | 13.2 | 17.1 | 21.7 | 17.2 | 21.7 | 26.9 | 2.17 | 26.9 | 34.0 |
Screw stroke | in | 4.09 | 5.51 | 6.30 | |||||||||
Injection speed (max.) |
in/sec | 15.75 | 13.78 | ||||||||||
Screw speed (rpm) |
rpm | 400 | |||||||||||
Heater capacity (5 zones) |
KW | 4.2 | 4.8 | 5.4 | 6.5 | 7.5 | 8.4 | 7.5 | 8.4 | 10.3 | 8.4 | 10.3 | 11.5 |
Nozzle contact force |
U.S.ton | 4.8 | |||||||||||
Inj. unit stroke (penetration) |
in | 13.19 (1.77) | |||||||||||
Hopper capacity | in3 | 915 | 1831 | 1831 | 3051 |
Clamping force | U.S.Ton | 146 |
Distance between tie-bars |
In | 20.08 x 20.08 |
Overall size of platens (H x V) |
In | 28.35 x 28.35 |
Open daylight (max.) |
In | 33.46 |
Mold space (min.-max.) |
In | 7.09 x 17.72 |
Opening stroke (max.) |
In | 15.75 |
Mold open/close speed (max.) |
In/Sec | 47.24 |
Locating ring diameter |
In | 4.0 |
Ejector pattern | Center, 7.0 in (5 points) | |
Ejector stroke | In | 3.94 |
Ejector force | U.S.Ton | 3.60 |
Plasticizing unit | C160S | C250M | C360M | C450M | |||||||||
Screw diameter | mm | 25 | 28 | 32 | 28 | 32 | 36 | 32 | 36 | 40 | 36 | 40 | 45 |
Injection pressure |
p.s.i. | 39,740 | 31,618 | 24,221 | 41,191 | 31,473 | 24,801 | 39,595 | 31,183 | 25,382 | 37,565 | 30,313 | 23,931 |
Holding pressure | p.s.i. | 39,740 | 31,618 | 24,221 | 41,191 | 31,473 | 24,801 | 39,595 | 31,183 | 25,382 | 37,565 | 30,313 | 23,931 |
Injection capacity |
in3 | 3.1 | 3.9 | 5.1 | 5.2 | 6.9 | 8.7 | 7.9 | 9.9 | 12.3 | 9.9 | 12.3 | 15.5 |
Injection weight | g | 49 | 61 | 80 | 83 | 108 | 137 | 124 | 156 | 193 | 156 | 193 | 244 |
oz | 1.7 | 2.2 | 2.8 | 2.9 | 3.8 | 4.8 | 4.4 | 5.5 | 6.8 | 5.5 | 6.8 | 8.6 | |
Plasticizing capacity (max.) |
lb/hr | 57 | 82 | 117 | 82 | 117 | 168 | 117 | 168 | 223 | 168 | 223 | 300 |
Injection rate | in3/sec | 12.0 | 15.0 | 19.6 | 13.2 | 17.1 | 21.7 | 17.2 | 21.7 | 26.9 | 2.17 | 26.9 | 34.0 |
Screw stroke | in | 4.09 | 5.51 | 6.30 | |||||||||
Injection speed (max.) |
in/sec | 15.75 | 13.78 | ||||||||||
Screw speed (rpm) |
rpm | 400 | |||||||||||
Heater capacity (5 zones) |
KW | 4.2 | 4.8 | 5.4 | 6.5 | 7.5 | 8.4 | 7.5 | 8.4 | 10.3 | 8.4 | 10.3 | 11.5 |
Nozzle contact force |
U.S.ton | 4.8 | |||||||||||
Inj. unit stroke (penetration) |
in | 13.19 (1.77) | |||||||||||
Hopper capacity | in3 | 915 | 1831 | 1831 | 3051 |